HOME
ABOUT
PRODUCTS
NEWS
PROJECT
SERVICE
CONTACT

NEWS

Quality Shelf Manufacturing in China

Company News

Industry Info

Technical Info

Installation considerations for attic shelves

Time:

2021-09-15

Attic shelves are essential warehousing equipment, the application of attic shelves can greatly improve the use of warehouse, but the homework structure is slightly complex.

Installation considerations for attic shelves

Attic shelves are essential warehousing equipment, the application of the attic shelves can greatly improve the use of warehouse, but the housing shelf belongs to the large-scale storage equipment structure slightly complicated, so there are many places to pay attention to during the installation process, below Everyone explains in detail the installation considerations of the attire, I hope to help everyone.

7 installation considerations for attic shelves:

1: Structure positioning.

The position of the housing shelf is basically, and it is also necessary to step. In the structural positioning, it is necessary to reserve a blank bit according to the actual situation. Similar to the pendant, first install the column, then graft the beam.

2: stairs.

In order to facilitate the installation of the attic shelves, install the attic staircase can reduce the cost of installation time. It is recommended that the active stairs can be installed first. The welding fixed stairs can be installed after installation of the attic shelves, and the channel distance is deviated, the stairs cannot be installed normally.

3: Layer shelves on the attic.

Attic shelves will not be separate, usually in the warehousing environment, the upper layer of the attic shelves will be equipped with a layered shelf. The shelf installation needs to wait for the loft to complete, and the welding can only be installed.

4: Plate installation.

The plate is easy to install, you need to do a multi-site welding after installation, to ensure that the laminate does not make friction or activity after receiving the squeezing, and the installer is required to continuously debug.

5: Chemical bolts are stable.

After the column beam is installed, it is necessary to use chemical bolts to make holes. After chemical bolts, they need to wait for 10 minutes, and then install the cabinet shelf parts.

6: Installation of the base of the attic.

At the bottom of the attic is usually carried out after the overall structure of the attic, or it can be adjusted.

7: Lighting.

Lighting is a must-have, the location of the Loft shelf is essential. In installation, the position of the lighting lamp cannot be left in the loft, the light installation, the installation of the Label is installed, and all shelf exhibition will be installed.